Motor core SMC iron core in the application is very extensive, which knowledge in this process we can understand it, today Dongguan fine magnetic small editor will bring this knowledge point, hope to help. For you to sort out a few motor core SMC iron core questions and related answers, please the motor core SMC iron core knowledge needs you, you can see.

　1, the relationship between the motor core SMC core and the motor power:
The larger the total volume of the SMC iron core of the motor, the less the number of turns per Volt voltage winding coil, and the larger the diameter of the wire that the iron core slot can accommodate, the greater the motor power, and vice versa. The smaller the motor power.
2, the motor core is the standard piece:
The standard series of motors are designed uniformly by the relevant departments, and the motor structure, including the iron core, is unified. In addition to the non-standard Motors, the size of the iron core must be designed according to the requirements of the user. Therefore, the SMC iron core of the motor core is not a standard piece.
I hope you can refer to the above. And after reading the above article, if you find that there are places that need to be modified or supplemented, Dongguan Magnetism Electronics Technology Co., Ltd. hopes that you can point out in time.
The answer to that question is yes! Similar to the algorithm used for Transformer cores, the magnetic conductivity(flux) is shown below.
The iron core used for the motor is a "non-directional" Silicon steel sheet, and the low permeability(magnetic flux) is generally 7,000-8,000 Gauss.
The iron core used in the Transformer is a "grain" Silicon steel sheet, and the high permeability(magnetic flux) is generally taken from 12000 to 18,000 Gauss.
The above is today's full content, if you want to know more about the motor core knowledge, you may wish to pay regular attention to our website news.